Home > Gas purification unit >

TEG Gas Dehydration Unit Vacuum Dehydration Unit for Natural Gas Purification System

Product Categories

Gas generator set [10]
LNG plant [10]
Gas purification unit [10]
Tail gas treatment [10]
Ungrouped [10]

Sichuan Rongteng Automation Equipment Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

TEG Gas Dehydration Unit Vacuum Dehydration Unit for Natural Gas Purification System

原产地 : Sichuan, China

品牌 : RT

用途 : 脱水

电压 : 380V, 480V

重量 : 45000 KG, 变化

尺寸(长×宽×高) : 变化

保修期 : 2年

核心卖点 : 环保

机械测试报告 : 可提供

视频出厂验货 : 可提供

核心组件 : PLC, 压力容器

应用程序 : 天然气净化

认证 : ISO9000、ISO14000

OEM : Avaliable

配置 : 固定

容量 : 2.5 ~ 50x104 Nm3/d

颜色 : 客户的要求

条件 : 新建

提供售后服务 : 在线支持

Contact Now

Product Description

TEG Gas Dehydration Unit Vacuum Dehydration Unit for Natural Gas Purification System

Description:

The dehydration unit of feed gas is wet natural gas purification, and the unit capacity is 2.5~50x10⁴ . The elasticity of operation is 150-100% and the annual production time is 8000 hours.

The device adopts about 99.74% (wt) triethylene glycol (TEG dehydrating agent, removing the most saturated water in wet natural gas purification, purification by TEG absorber after dehydration dry gas (in the factory water dew point pressure condition <-5 ℃) as a commodity to outside gas pipeline.

After water absorption, TEG is regenerated by the method of atmospheric pressure fire tube heating and regeneration. After heat exchange, the heat-depleted liquid is cooled and returned to the TEG absorption tower after pressurization for recycling.

The gas-forming components produced by the regeneration of the rich liquid are mainly water vapor and contain a small amount of hydrocarbons and gases.

In order to eliminate potential safety hazards and avoid direct emissions of environmental pollution, the recycled waste gas from the sulfur recovery device is discharged into the atmosphere after burning in the exhaust gas burning furnace.

Features:

1. TEG dehydration process is simple, mature technology, compared with other dehydration method can obtain a larger dew point drop. Good thermal stability. It is easy to regenerate and has the advantages of small loss, low investment and operation cost.

2. A lean/rich liquid heat exchanger is installed before the lean liquid circulating pump, which not only improves the operating conditions of the circulating pump, but also increases the temperature of TEG rich liquid into the triethylene glycol regenerator, effectively recovering part of the heat and reducing the consumption of fuel gas for regeneration.

3. Set a filter on the rich liquid channel to remove the mechanical impurities and degradation products carried in the solution system, keep the solution clean and prevent the solution from foaming, which can reduce the loss of the solvent and is conducive to the long-term stable operation of the device.The direct fire tube heating method adopted in TEG regeneration is mature, reliable and easy to operate.

Specification

	Inlet gas condition
1	Flow	290.1X10⁴ Nm³/d
2	Inlet Pressure	4.86-6.15 MPa
3	Inlet Temperature	-48.98℃
	Outlet gas condition
4	Flow	284.4X104 Nm³/d
5	Outlet pressure	4.7-5.99 MPa
6	Outlet temperature	-50.29℃
7	H₂S	≤20g/m³
8	CO₂	≤3%
9	Water dew point	<-5℃

Company Profile

Sichuan Rongteng Automation Equipment Co.,Ltd.is the wholly-owned subsidiary of Sichuan Jinxing Clean Energy Equipment Holding Co.,Ltd.We have been in oil and natural gas industry since 1995.

We provide solutions and equipment for the below. Crude oil treatment equipment Wellhead treatment equipment Natural gas conditioning equipment Light hydrocarbon recovery unit LNG Plant Gas compressor

FAQ

How to ensure your Products quality?
We have been in this field for more than 20 years. Our products have been sold almost all over the world. We allow 3rd party inspections before shipment ( on buyer's account) And we can supply certificate of quality accordingly.We also have a matching quality control system that strictly controls product safety before leaving the factory.

Can I customize the logo?
If you do not require, we will use our own brand, if you require custom logo, we can also provide this service.

What is your MOQ?
one set.

How long can you provide warranty?
For no special reason, we provide a 1-2 year warranty. At the same time, if you have problems during use, we provide technical assistance.

How about your delivery time?
In general, it will take 35-90 days after receiving deposit. The specific delivery time depends on the items and quantity of your order.

What's international certificate for your Products?
ASME,GB

Your service?
We will try to reply your inquires in 24 hours.
All our sales stuff will stand in customer’s requirements.
Most of our machine can be customized,we will try to meet client’s requirements.
We have experienced engineer to assist the sales for your answer.
Our aim is wholeheartedly service for customer.

Recommend Products

Natural gas gathering unit

LNG liquefaction plant

Oil gas test and separator skid

Oil gas mixed transportation skid

Natural gas dehydration unit

Gas compressor

TEG Gas Dehydration Unit Vacuum Dehydration Unit for Natural Gas Purification System Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sichuan Rongteng Automation Equipment Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!